STRESS-STRAIN STATE COMPUTER ANALYSIS OF THE PLATINUM ALLOY DRAWING TOOL
https://doi.org/10.17073/0021-3438-2016-1-15-18
Abstract
The computer analysis was made to evaluate the stress state of a workpiece and an axisymmetrically positioned tool at the stage of steady drawing process of PtNi equiatomic alloy using finite-element method in the DEFORM-2D software environment. The diamond tool geometry is proposed to reduce hardness and weight without changing basic process parameters.
About the Authors
O. M. Ogorodnikova
Ural Federal University
Russian Federation
Russian Federation
Cand. Sci. (Phys.-Math.), associate prof., Electronics Machine-Building Department,
620002, Ekaterinburg, Mira str., 19
E. M. Borodin
Ural Federal University
Russian Federation
Russian Federation
Cand. Sci. (Eng.), associate prof., Electronics Machine-Building Department,
620002, Ekaterinburg, Mira str., 19
References
1. Yastrebov V.A. Dispersionno-uprochnennye materialy na osnove platiny, ih svoistva i primenenie [Dispersed strengthened platinum-based materials, their properties and application]. Tsvetnye metally. 2007. No. 2. P. 112—116.
2. Kamenetsky B.I., Grokhovskaya L.G., Loginov Yu.N., Studenok G.I. Issledovanie deformatsionnyh harakteristik i struktura splava PlN-4,5 pri izgotovlenii polyh zagotovok metodom glubokoi vytyazhki [Study of deformation parametres and structure of PtNi-4.5 alloy in manufacture of hollow blanks by deep drawing method]. Tsvetnye metally. 2007. No. 8. P. 51—53.
3. Vasilieva E.V., Volkova R.M., Zakharova M.I., Matveeva M.P., Shnyrev G.D. Platina, ee splavy i kompozitsionnye materialy [Platinum, alloys and composite materials]. Moscow: Metallurgiya, 1980.
4. Ogorodnikova O.M., Litvinov V.S., Sakhanskaya I.N. Uporyadochenie, rekristallizatsiya i mekhanicheskie svoistva splavov Pt—Ni—Cu [Ordering, recrystallization and mechanical properties of Pt—Ni—Cu alloys]. Fizika metallov i metallovedenie. 1989. Vol. 68. No. 5. P. 969—973.
5. Ulybysheva L.P., Tykochinsky D.S. Ratsional’noe ispol’zovanie platinovyh metallov v proizvodstve steklyannogo volokna [Rational using of platinum metals in the production of the fiberglass]. Tsvetnye metally. 2012. No. 5. P. 40—46.
6. Esaulov M.I. Formoustoychivost’ binarnyh splavov i puti ee povysheniya [Form stability of the binary alloys and the ways of it’s increase]. Naukoemkie tekhnologii. 2008. No. 2. P. 22—23.
7. Ogorodnikova O.M., Litvinov V.S. Kinetika uporyadocheniya splavov platina—nikel’—med’ po tipu L10 [Kinetics of ordering of platinum—nickel— copper alloys by L1(0) type]. Fizika metallov i metallovedenie. 1993. Vol. 75. No. 6. P. 113—117.
8. Morris A.R., Skoglund M.D., Holles J.H. Characterization of Ni@Pt and Co@Pt overlayer catalysts using XAS studies. Appl. Catal. A. General. 2015. Vol. 489. P. 98—110.
9. Gushchin G.M., Cheremnyh V.P., Sivkov G.M. Setki i katalizatornie sistemy dlya azotnoy promyshlennosti [Grids and catalyst systems on a base of platinum and palladium alloys for the nitrogen industry]. Dragotsennie metally. Dragotsennie kamni. 2005. No. 8 (140). P. 163—166.
10. Ogorodnikova O.M., Borodin E.M., Gudin A.A. Komp’yuternoe issledovanie instrumenta dlya izgotovleniya provoloki [A computational study of tool for wire drawing]. Komp’yuternie issledovaniya i modelirovanie. 2014. Vol. 6. No. 6. P. 983—989.
11. Guryanov G.N. Vliyanie intensivnosti deformatsionnogo uprochneniya provoloki na optimal’nuyu formu rabochego kanala voloki [Influence the intensity of work hardening of the wire on the optimal shape of the working channel portages]. Uprochnyayuschchie tekhnologii i pokrytiya. 2015. No. 2(122). P. 14-20.
12. Kolmogorov G.L., Kobeleva E.K., Snigireva M.V., Chernova T.V. Energy-power characteristics when drawing a trimetal billet. Russ. J. Non-Ferr. Met. 2013. Vol. 54. No. 6. P. 467—469.
13. Kargin V.R., Kargin B.V., Kolesnikova S.Yu. Raspredeleniye kontaktnyh napryazheniy v protsesse volocheniya kruglyh izdeliy [The distribution of the contact stresses in the process of drawing round products]. Izvestiya vuzov. Tsvetnaya metallurgiya. 2013. No. 4. P. 25—28.
14. Ogorodnikova O.M. Issledovatel’skaya funktsiya programm CAE v skvoznyh tehnologiyah CAD/CAE/CAM [Scientific research application of САЕ software in CAD/CAE/CAM technologies]. Vestnik mashinostroyeniya. 2012. No. 1. P. 25—31.
15. Ogorodnikova O.M., Litvinov V.S., Sakhanskaya I.N. Tekstura, struktura i plastichnost’ uporyadochennogo splava NiPt [Texture, structure and plasticity of ordered NiPt alloy]. Fizika metallov i metallovedenie. 1990. Vol. 70. No. 7. P. 147—151.
16. Ogorodnikova O.M., Litvinov V.S., Kuranov A.A., Karpov Yu.G. Razuporyadochenie i rekristallizatsiya splavov Pt—Ni—Cu [Disordering and recrystallization of Pt—Ni—Cu alloys]. Fizika metallov i metallovedenie. 1988. Vol. 65. No. 5. P. 967—969.
17. Fort Wayne Wire Die. URL: http://www.fwwd.com (accessed: 15.09.2015).
Review
For citations:
Ogorodnikova O.M., Borodin E.M. STRESS-STRAIN STATE COMPUTER ANALYSIS OF THE PLATINUM ALLOY DRAWING TOOL. Izvestiya. Non-Ferrous Metallurgy. 2016;(1):15-18. (In Russ.) https://doi.org/10.17073/0021-3438-2016-1-15-18
Views:
709
Email this article 