An installation for the combined continuous casting and deformation for the production of bimetallic strips
https://doi.org/10.17073/0021-3438-2015-6-30-35
Abstract
The results of studying a new combined process of continuous casting and deformation for manufacturing bimetallic strips are presented. A procedure for calculating parameters of the manufacturing process and installation for the production of bimetallic strips is proposed. Stresses in the deformation region of metal of the cladding layer when producing steel–aluminum bimetal are determined. To evaluate a new manufacturing technology of bimetallic strips and bimetal quality, experimental investigations of fabricating steel–aluminum bimetal using a pilot installation are performed.
About the Authors
O. S. Lekhov
Российский государственный профессионально-педагогический университет (РГППУ), г. Екатеринбург
Russian Federation
Russian Federation
Dr. Sci. (Eng.), Prof., Department of Vehicles and Handling Machines, Russian State Vocational Pedagogical University (RSVPU) (Russia, 620012, Ekaterinburg, Mashinostroiteley str., 11)
L. V. Lisin
Российский государственный профессионально-педагогический университет (РГППУ), г. Екатеринбург
Russian Federation
Сompetitor for academic degree of Cand. Sci., RSVPU
Russian Federation
Сompetitor for academic degree of Cand. Sci., RSVPU
References
1. Kuznecov E.V., Kobelev A.G. Bimetall: sovremenniy tekhnologii i primenenie. In: Plasticheskja deformacia staley i splavov [Bimetals: morden technologies and application. In: Plastic deformation staly and alloys]. Moscow: MISiS, 1996. Р. 296—302.
2. Kuznecov E.V. Osnovniye napravlenia razvitia tekhnologii proizvodstva bimetallov. In: Teoria i tekhnologia processov plasticheskoi deformacii [The principal directions of development technology of the production bimetals. In: Theory and technology of processes of plastic deformation]. Moscow: MISiS, 1997. Р. 111—119.
3. Korol V.K., Gildengorn M.S. Osnoviy tekhnologii proizvodstva mnogosloinukh metallov [The basis technology of the production multilayer metals]. Moscow: Metallurgia, 1970.
4. Kobelev A.G., Potapov I.N., Kuznecov E.V. Tekhnologia sloistiykh metallov [The technology of the layered metals]. Moscow: Metallyrgia, 1991.
5. Kuznecov E.V. Metallicheskie kompozicii [The metall compositions]. Moscow: Metallurgia, 1992.
6. Stulov V.V., Odinokov V.I. Issledovanie poluchenia nepreriyvnolitiykh kovanniykh armirovanniykh zagotovok [Research receipt continuously cast reinforced forged blanks]. Izv. vuzov. Cher. metallurgia. 1997. No. 2. P. 20—22.
7. Lekhov O.S. Sposob nepreriyvnogo litia zagotovok i ystroistvo dlia ego osuchhestvlenia [Method of continuous casting of ingots and installation for it realization]: Pat. 2077407 (RF). 2000.
8. Lekhov O.S., Komratov Yu.S. Sovmechhenniye processiy nepreriyvnogo litia I deformacii dlia proizvodstva prokata [The combined processes of continuous castind and deformation for production the rolled metal]. Ekaterinburg: UGTU—UPI, 2009.
9. Lekhov O.S., Komratov Yu.S., Tuev M.Yu. Issledovanie sovmechhennogo processa nepreriyvnogo litia i deformacii dlia poluchenia lista iz aluminia [Investigation of the combined process of continuous casting and deformation for obtaining the sheet from aluminum]. Proizvodstvo prokata. 2009. No. 6. P. 41—43.
10. Lekhov O.S. Sposob poluchenia bimetallicheskoi polosiy [Method of obtaining the bemetall strip]: Pat. 2064364 (RF). 2000.
11. ANSYS. Structural analysis Guide. Rel.6.0.http//www.cadfern.ru
12. Oden D. Konechniye elementiy v nelineinoi mekhanike sploshiykh sred [Finite elements in nonlinear continuum mechanics]. Мoscow: Mir, 1976.
13. Gallager R. Metod konechniykh elementov [Method of finite elements]. Мoscow: Mir, 1984.
14. Zenkevich O., Morgan K. Konechniye elementiy i aproksimasia [Finite element and approximation]. Мoscow: Mir, 1986.
15. Norri D., Friz G. Vvedenie v metod konechniykh elementov [The introduction in method of finite elements]. Мoscow: Mir, 1981.
Review
For citations:
Lekhov O.S., Lisin L.V. An installation for the combined continuous casting and deformation for the production of bimetallic strips. Izvestiya. Non-Ferrous Metallurgy. 2015;(6):30-35. (In Russ.) https://doi.org/10.17073/0021-3438-2015-6-30-35
Views:
690
Email this article 