Speed effect upon varying the cyclic loading frequency for certain pure metals
https://doi.org/10.17073/0021-3438-2015-5-46-52
Abstract
The results of studying the surface damageability of pure metals found in the course of fatigue tests are described. A character of the rate dependence for resistance of cyclic deformation of metals upon varying the frequency of loading cycles, homological temperature, and
stacking fault energy are described.
About the Authors
V. V. Myl’nikovRussian Federation
D. I. Shetulov
Russian Federation
E. A. Chernyshov
Russian Federation
References
1. Mak-Ivili A.J. Analiz avariynyh razrysheniy [Analysis for accidental damage]. Transl. E.M. Lazarev, I.Y. Shkadina. Ed. L.R. Botvina. Moscow: Technosfera, 2010.
2. Romaniv O.N., Yaremy S.Ya., Nikiforchin G.N. Mehanika razrysheniya i prochnoct’ materialov: Spravochnoe posobie. Vol. 4. Ustalost’ i tsiklicheskaya treshchinostoikost’kon stryktsionnyh materialov [Fracture mechanics and strength of materials. Vol. 4. Fatigue and cyclic crack resistance of structural materials]. Ed. V.V. Panasyk. Kiev: Naykova Dymka, 1990.
3. Ivanova V.S., Shanyavskiy A.A. Kolichestvennaya fraktografiya. Ustalostnoe razrushenie [Quantitative fractography. Fatigue failure]. Moscow: Metallurgiya, 1988.
4. Terent’ev V.F. Ustalostnaya prochnost’ metallov i splavov [The fatigue strength of metals and alloys]. Moscow: Intermet Inzhiniring, 2002.
5. Myl’nikov V.V., Chernyshov E.A., Shetulov D.I. Prognozirovanie tsiklicheskoy prochnosti i dolgovechnosti konstruktsionnyh materialov [Prediction of fatigue strength and durability of structural materials]. Moscow: Izd-vo «Sputnik+», 2013.
6. Sokolov L.D., Skudnov V.A., Solenov V.M. Mehanicheskie svoistva redkih metallov [Mechanical properties of rare metals]. Moscow: Metallurgiya, 1972.
7. Gottshtain G. Fiziko-himicheskie osnovy materialovedeniya [Physical and chemical bases of materials]. Transl. K.N. Zolotova, D.O. Charkin. Ed. V.P. Zlomanov. Moscow: BINOM. Laboratoriya znany, 2011.
8. Kol’tsyn U.I., Mel’nikov B.E., Hibnik T.A., Prohorov A.A. Vliyanie chastoty i nagryzki na volnovye deformatsionnye processy pri mnogotsiklovoy ustalosti [The influence of frequency and load on the wave deformation processes in highcycle fatigue]. Vestnik Samarskogo Gos. Aerokosmicheskogo universiteta. 2009. No. 3(19). P. 274—282.
9. Myl’nikov V.V., Shetulov D.I., Pronin A.I., Chernyshov E.A. Prognozirovanie prochnosti i dolgovechnosti materialov detaley mashin i konstruktsiy s uchetom chastotyi ciklicheskogo nagryzheniya [Prediction of strength and durability of machine parts and materials designs, taking into account the frequency of cyclic loading]. Izvestiya vyzov. Chernaya metallurgiya. 2012. No. 9. P. 32—37.
10. Myl’nikov V.V., Chernyshov E.A., Shetulov D.I. Svyaz’ parametrov soprotivleniya ustalosti ryada konstruktsionnyh materialov s izmeneniem chastoty tsiklicheskogo nagruzheniya [Communication parameters of the fatigue resistance of a number of construction materials with changing frequency cyclic loading]. Zagotovitel’nye proizvodstva v mashinostroenii. 2012. No. 7. P. 41—45.
11. Myl’nikov V.V., Shetulov D.I., Chernyshov E.A. Variation in faktors of fatigue resistance for some pure metals as a function of the freguensy of loading sycles. Russ. J. Non-Ferr. Met. 2010. Vol. 51. No. 3. Р. 237—242.
12. Myl’nikov V.V., Shetulov D.I., Chernyshov E.A. Investigation into the Surface Damage of Pure Metals Allowing for the Cyclic Loading Frequency. Russ. J. Non-Ferr. Met. 2013. Vol. 54. No. 3. Р. 229—233.
Review
For citations:
Myl’nikov V.V., Shetulov D.I., Chernyshov E.A. Speed effect upon varying the cyclic loading frequency for certain pure metals. Izvestiya. Non-Ferrous Metallurgy. 2015;(5):46-52. (In Russ.) https://doi.org/10.17073/0021-3438-2015-5-46-52