Preview

Izvestiya. Non-Ferrous Metallurgy

Advanced search

INFLUENCE OF THE STRUCTURE OF CHARGE BILLETS, OVERHEATING, AND HOLDING TIME OF MELTS ON THE PROPERTIES OF AL–5WT.%CU ALLOYS IN THE LIQUID AND SOLID STATES

https://doi.org/10.17073/0021-3438-2015-1-33-38

Abstract

The influence of the structure of charge bars, overheating temperatures, and isothermal holding time of Al–5 wt % Cu melts on their properties in solid and liquid states is investigated. It is revealed using the express method that the density of melts obtained from fine-crystalline charge bars (F-c charge) has reduced values compared with the melts from coarse-crystalline charge bars (C-c charge). This peculiarity is retained over the entire studied range of overheating temperatures (760–1060 °C). The influence of the structure of initial charge bars manifests itself in the second generation (after melting and crystallization from corresponding overheating temperatures): alloys fabricated from the F-c charge have the smaller dendritic parameter α-Al and increased density and electrical conductivity compared with the alloys made from the C-c charge. It is shown that the involvement of deformed aluminum and copper waste into the charge composition provides the finely dispersed structure and increased density of Al–5 wt % Cu alloys in the solid and liquid states.

About the Authors

K. V. Nikitin
Самарский государственный технический университет (СамГТУ)
Russian Federation


V. I. Nikitin
Самарский государственный технический университет (СамГТУ)
Russian Federation


I. Yu. Timoshkin
Самарский государственный технический университет (СамГТУ)
Russian Federation


D. S. Krivopalov
Самарский государственный технический университет (СамГТУ)
Russian Federation


D. G. Chernikov
Самарский государственный аэрокосмический университет (СГАУ) им. акад. С.П. Королева (национальный исследовательский университет)
Russian Federation


References

1. Никитин В.И., Никитин К.В. Наследственность в литых сплавах. М.: Машиностроение-1, 2005.

2. Бродова И.Г., Попель П.С., Барбин Н.М., Ватолин Н.А. Исходные расплавы как основа формирования структуры и свойств алюминиевых сплавов. Екатеринбург: УрО РАН, 2005.

3. Никитин К.В. Повышение эффективности производства литых изделий из алюминиевых сплавов функционального и конструкционного назначений на основе управления структурой и свойствами шихтовых металлов: Автореф. дис. … докт. техн. наук. Красноярск: СФУ, 2013.

4. Никитин В.И. Наследственность в литых сплавах. Самара: СамГТУ, 1995.

5. Петров И.Ю. Кластеры и малые частицы. М.: Наука, 1986.

6. Мондольфо Л.Ф. Структура и свойства алюминиевых сплавов. М.: Металлургия, 1979.

7. Филиппов Е.С. Строение, физика и химия металлургических расплавов. М.: Металлургия, 1995.

8. Баталин Г.И., Белобородова Е.А., Казимиров В.П. Термодинамика и строение жидких сплавов на основе алюминия. М.: Металлургия, 1983.

9. Гаврилин И.В. Плавление и кристаллизация металлов и сплавов. Владимир: ВГУ, 2000.

10. Дубровский С.А. // Вести высш. уч. зав. Черноземья. 2008. № 1. С. 89.


Review

For citations:


Nikitin K.V., Nikitin V.I., Timoshkin I.Yu., Krivopalov D.S., Chernikov D.G. INFLUENCE OF THE STRUCTURE OF CHARGE BILLETS, OVERHEATING, AND HOLDING TIME OF MELTS ON THE PROPERTIES OF AL–5WT.%CU ALLOYS IN THE LIQUID AND SOLID STATES. Izvestiya. Non-Ferrous Metallurgy. 2015;(1):33-38. (In Russ.) https://doi.org/10.17073/0021-3438-2015-1-33-38

Views: 825


ISSN 0021-3438 (Print)
ISSN 2412-8783 (Online)