THE EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE AND PHASE COMPOSITION OF TI–AL–NB–MO-SYSTEM BASED TNM-TYPE Β-SOLIDIFIED CASTINGS
https://doi.org/10.17073/0021-3438-2013-6-27-35
Abstract
The work purpose is a study of the effect of hot isostatic pressing (HIP) on the microstructure and phase composition of titanium aluminide based alloys using experimental and computational methods. Isothermal and polythermal sections of the Ti–Al–Nb–Mo system, liquidus, solidus, and other phase change temperatures are calculated by dint of Thermo-Calc program. General character of microstructure after vacuum annealing and HIP-processing at t = 1250 °C is shown to be about identical: γ + α2 eutectoid colonies and relatively compact particles of β and γ phases. However vacuum annealing, unlike HIP, does not result in elimination of casting porosity. The data of metallographic and X-ray microspectroscopic analyses confirm the computational results as a whole.
About the Authors
N. A. Belov
Samoshina M.E.
Russian Federation
Russian Federation
M. E. Samoshina
Национальный исследовательский технологический университет «МИСиС», г. Москва
Russian Federation
Russian Federation
References
1. Ильин А.А., Колачев Б.А., Полькин И.С. Титановые сплавы. Состав, структура, свойства: Справочник. М.: ВИЛС–МАТИ, 2009.
2. Appel F., Paul J.D.H., Oehring M. Gamma Titanium Aluminide Alloys: Science and Technology. Wiley-VCH Verlag & Co. KGaA, 2011.
3. Wu X. // Intermetallics. 2006. Vol. 14. P. 1114.
4. Tet sui T. // Mater. Sci. Eng. 2002. Vol. A329–331. P. 582.
5. Si-Young Sung, Young-Jig Kim // Intermetallics. 2007. Vol. 15. P. 468.
6. Liu K., Ma Y.C., Gao M. et al. // Ibid. 2005. Vol. 13. P. 925.
7. Barbosa J., Ribeiro C.S., Monteiro A.C. // Ibid. 2007. Vol. 15. P. 945.
8. Kuang J.P., Harding R.A., Campbell J. // Mater. Sci. Eng. 2002. Vol. A329–331. P. 31.
9. Harding R.A., Wickins M., Wang H. et al. // Intermetallics. 2011. Vol. 19. P. 805.
10. Beddoes J., Seo D.Y., Chen W.R., Zhao L. // Ibid. 2001. Vol. 9. P. 915.
11. Hodge A.M., Hsiung L.M., Nieh T.G. // Scripta Mater. 2004. Vol. 51. P. 411.
12. Hu D., Wu X., Loretto M.H. // Intermetallics. 2005. Vol. 13. P. 914.
13. Witusiewicz V.T., Bondar A.A., Hecht U., Velikanova T.Ya. // J. Alloys and Compounds. 2009. Vol. 472. P. 133.
14. Hao Y.L., Yang R., Cui Y.Y., Li D. // Acta Mater. 2000. Vol. 48. P. 1313.
15. Kainuma R., Fujita Y., Mitsui H. et al. // Intermetallics. 2000. Vol. 8. P. 855.
16. Hu D. // Ibid. 2001. Vol. 9. P. 1037.
17. Wu X., Hu D. // Scripta Mater. 2005. Vol. 52. P. 731.
18. Wang J.N., Xie K. // Ibid. 2000. Vol. 43. P. 441.
19. Jin Y., Wang J.N., Yang J., Wang Y. // Ibid. 2004. Vol. 51. P. 113.
20. Huang Z.W., Voice W., Bowen P. // Ibid. 2003. Vol. 48. P. 79.
21. Güther V., Rothe C., Winter S., Clemens H. // BHM. 2010. Vol. 155(7). P. 325–329.
22. Белов Н.А., Белов В.Д. // Литейщик России. 2012. № 6. С. 43–46.
Review
For citations:
Belov N.A., Samoshina M.E. THE EFFECT OF HEAT TREATMENT ON MICROSTRUCTURE AND PHASE COMPOSITION OF TI–AL–NB–MO-SYSTEM BASED TNM-TYPE Β-SOLIDIFIED CASTINGS. Izvestiya. Non-Ferrous Metallurgy. 2013;(6):27-35. (In Russ.) https://doi.org/10.17073/0021-3438-2013-6-27-35
Views:
784
Email this article 