Mathematical model of magnetic hydrodynamics and heat transfer in aluminium reduction cell

The paper presents a new nonstationary three-dimensional mathematical model of an aluminium reduction cell which makes it possible to perform coupled thermoelectric and magnetohydrodynamic calculations taking into account sideledge formation. The model considers the nonlinear dependence of material electrical conductivity and thermal conductivity coefficients on temperature, and the nonlinear dependence of magnetization on the magnetic field strength for ferromagnetic materials. Heat transfer coefficients on outer surfaces included the radiant and convective components of heat transfer and were functions of the ambient temperature and the local surface temperature. The energy equation took into account internal heat sources due to the electric current flow, exothermic reactions and additional thermal effects associated with the raw material loading and phase transitions. The control volume method was used to obtain a numerical solution. The developed mathematical model was experimentally tested at the S8BME aluminium reduction cell. The paper presents the calculated and experimental data of magnetic, electric, thermal and hydrodynamic fields. The comparison of calculation results with the results of industrial experiments showed that the developed model reflects physical processes taking place in the aluminium reduction cell with accuracy sufficient for engineering calculations. The calculated values of electrical voltage, magnetic induction and temperature practically coincide with the measured ones. Velocity directions in the metal and the sideledge profile shape obtained by calculation have insignificant differences from experimental values. The developed model can be used to estimate operation specifications and design parameters for new and modernized aluminium reduction cells. Further studies will be aimed at refining the calculated results by improving the developed mathematical model.

1. Qiang Wang, Baokuan Li, Mario Fafad. Effect of anode change on heat transfer and magnetohydrodynamic flow in aluminum reduction cell. JOM. 2016. No. 68. P. 610— 622.

2. Yang Song, Jianping Peng, Yuezhong Di, Yaown Wang, Naixiang Feng. Performance of the cathodes with trapezoidal protrusions in aluminum electrolysis cells. JOM. 2017. No. 69. P. 2844—2850.

3. Meijia Sun, Baokuan Li, Linmin Li, Jianping Peng. Effect of steel multi-collector bars on current density and magnetohydrodynamic stability in an aluminum reduction cell. Light Metals. 2018. P. 565—572.

4. Bojarevics V. Time dependent MHD models for aluminum reduction cells. Light Metals. 2010. P. 199—206.

5. Hua J., Rudshaug M., Droste C., Jorgensen R., Giskeodegard N.-H. Modelling of metal flow and metal pad heaving in a realistic reference aluminum reduction cell. Light Metals. 2016. P. 339—344.

6. Arkhipov A., Alzarooni A., Al Jasmi A., Potocnik V. Improving the undestanding of busbar design and cell MHD performance. Light Metals. 2017. P. 671—677.

7. Renaudier S., Langlois S., Bardet B., Picasso M., Masserey A. Alucell: A unique suite of models to optimize pot design and performance. Light Metals. 2018. P. 541—549.

8. Bardet B., Foetisch T., Renaudier S., Rappaz J., Flueck M., Picasso M. Alumina dissolution modelling in aluminium electrolysis cell considering MHD driven convection and thermal impact. Light Metals. 2016. P. 315—319.

9. Hongliang Zhang, Ling Ran, Jinding Liang, Tianshuang Li, Kena Sun, Jie Li. Study on 3D full cell ledge shape calculation and optimal design criteria by coupled thermos-flow model. Light Metals. 2018. P. 587—596.

10. ANSYS CFX Release 18.2.0 Documentation (2017).

11. Hirt C.W., Nichols B.D. Volume of fluid (VOF) method for the dynamics of free boundaries. J. Comput. Phys. 1981. No. 39. P. 201—225.

12. Brent A.D., Voller V.R., Reid K.J. Enthalpy-porosity technique for modeling convection-diffusion phase change: Application to the melting of a pure metal. Numerical Heat Transfer. 1988. No. 13(3). P. 297—318.

13. Arkhipov G.V., Pingin V.V., Tretyakov Ya.A. Polyakov P.V. Simulation of cell thermoelectric field with consideration of electrochemical processes. Light Metals. 2007. P. 327—331.

14. Nemchinova N.V., Radionov E.Yu., Somov V.V. Study of influence of working space shape on MHD-parameters of electrolyzer operation during aluminium production. Vestnik IRGTU. 2019. Vol. 23. No. 1. Р. 169—178 (In Russ.).

15. Mintsis M.Ya., Polyakov P.V., Sirazutdinov G.A. Aluminum electrometallurgy. Novosibirsk: Nauka, 2001 (In Russ.).

16. Potocnik V., Laroche F. Comparison of measured and calculated metal pad velocities for different prebake cell designs. Light Metals. 2001. P. 419—425.

17. Stakhanov V.V., Redkin A.A., Zaikov Y.P., Galashev A.E. Influence of electrolyte composition and overheating on the sideledge in the aluminum cell. Izv. vuzov. Tsvet. Metallurgiya. 2018. No. 4. Р. 24—30 (In Russ.).

18. Hongliang Zhang, Qiyu Wang, Jie Li, Hui Guo, Jingkun Wang, Tianshuang Li. Study on side ledge behavior under current fluctuations based on coupled thermo-electric model. Light Metals. 2019. P. 647—655.

19. Nandana V., Gutt R., Gesell H., Cubeddu A., Duessel R., Janoske U. Virtual battery foam: A multi-physics numerical solver to simulate the aluminium electrolysis process. ICSOBA Conf. Belem, Brazil, 2018. P. 961—976.

20. Solheim A., Giskeodegard N.H., Holt N.J. Sideledge facing metal in aluminium electrolysis cells: Freezing and melting in the presence of a bath film. Light Metals. 2016. P. 333—338.

21. Solheim A., Hjertenas E., Tschope K., Kucharik M., Holt N.J. Sideledge in aluminium cells: Further considerations concerning the trench at the metal-bath boundary. Light Metals. 2019. P. 787—793.